Most Common Types of ASTM A213 T11 Tubes
ASTM A213 T11 Tube Supplier in India, provide excellent durability and resistance against corrosion.
SA 213 T11 Seamless Tube
ASTM A213 T11 Welded Tube
ASME SA213 T11 ERW Tube
A213 T11 Round Tube
SA 213 Gr T11 Square Tube
SA213 T11 Rectangular Tube
UNS K11597 Boiler Tube
WNR 1.7338 Heat Exchanger Tube
Alloy Steel SA 213 T11 Superheater Tube
ASTM A213 Gr T11 Coil Tubing
SA213T11 Condenser Tube
SA 213 T11 IBR Tube
T11 Steel Furnace Tubes
A213 T11 Heater Tube
OD Tolerance of T11 Boiler Tube
| Cold Drawn | OD (mm) | Tolerance (mm) |
|---|---|---|
| 190.5＜OD≤228.6 | +0.38/ – 1.14 | |
| 101.6＜OD≤190.5 | +0.38/ – 0.64 | |
| 76.2≤OD≤101.6 | ±0.38 | |
| 63.5≤OD＜76.2 | ±0.30 | |
| 50.8≤OD＜63.5 | ±0.25 | |
| 38.1＜OD＜50.8 | ±0.20 | |
| 25.4≤OD≤38.1 | ±0.15 | |
| OD＜25.4 | ±0.10 | |
| Hot rolled | OD (mm) | Tolerance (mm) |
| 190.5＜OD≤228.6 | +0.4/ – 1.6 | |
| 101.6＜OD≤190.5 | +0.4/ – 1.2 | |
| OD≤101.6 | +0.4/ – 0.8 |
| Cold Drawn | WT (mm) | Tolerance (%) |
|---|---|---|
| WT > 38.1 | +22/ – 0 | |
| WT ≤ 38.1 | +20/ – 0 | |
| Hot rolled | WT (mm) | Tolerance (%) |
| WT > 4.6 | +28/ – 0 | |
| WT ≤ 4.6 | +33/ – 0 | |
| WT ≤ 3.8 | +35/ – 0 | |
| WT > 4.6 | +28/ – 0 | |
| WT ≤ 4.6 | +33/ – 0 | |
| WT ≤ 3.8 | +35/ – 0 | |
| WT ≤ 2.4 | +40/ – 0 |
Weight Chart of SA 213 T11 Tube
| Size | OD | Weight/ft |
|---|---|---|
| 6 | 6.625 | 7.59 |
| 5 | 5.563 | 10.80 |
| 4 | 4.5 | 5.62 |
| 3 1/2 | 4.0 | 4.98 |
| 3 | 3.50 | 4.34 |
| 2 1/2 | 2.875 | 3.53 |
| 2 | 2.375 | 2.64 |
| 1 1/2 | 1.90 | 2.72 |
| 1 1/4 | 1.66 | 2.27 |
| 1 | 1.315 | 1.68 |
| 3/4 | 1.05 | 1.13 |
| 1/2 | 0.84 | 0.85 |
T11 Tube Material Schedule Chart
| Dimesions | Schedule | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | OD | S160 | S140 | S120 | S100 | S80 | XS/80S | S60 | S40 | S20 | S10 | 10S | 5S | 40S |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
| 36″ | 914.4 | – | – | – | – | – | 12.7 | – | 19.1 | 13 | 7.9 | – | – | 9.5 |
| 32″ | 812.8 | – | – | – | – | – | 12.7 | – | 17.5 | 13 | 7.9 | – | – | 9.5 |
| 28″ | 711.2 | – | – | – | – | – | 12.7 | – | – | 13 | 7.9 | – | – | 9.5 |
| 24″ | 609.6 | 59.5 | 52.4 | 46 | 38.9 | 31 | 12.7 | 24.6 | 17.5 | 9.5 | 6.4 | 6.4 | 5.5 | 9.5 |
| 20″ | 508 | 50 | 44.5 | 38.1 | 32.5 | 26.2 | 12.7 | 20.6 | 15.1 | 9.5 | 6.4 | 5.5 | 4.8 | 9.5 |
| 16″ | 406.4 | 40.5 | 36.5 | 31 | 26.2 | 21.4 | 12.7 | 16.7 | 12.7 | 7.9 | 6.4 | 4.8 | 4.2 | 9.5 |
| 12″ | 323.9 | 33.3 | 28.6 | 25.4 | 21.4 | 17.5 | 12.7 | 14.3 | 10.3 | 6.4 | – | 4.6 | 4 | 9.5 |
| 8″ | 219.1 | 23 | 20.6 | 19.3 | 15.1 | 12.7 | 12.7 | 10.3 | 8.18 | 6.4 | – | 3.8 | 2.8 | 8.2 |
| 4″ | 114.3 | 13.5 | – | 11.1 | – | 8.56 | 8.56 | – | 6.02 | – | – | 3.1 | 2.1 | 6 |
| 3 1/2″ | 101.6 | – | – | – | – | 8.08 | 8.08 | – | 5.74 | – | – | 3.1 | 2.1 | 5.7 |
| 3″ | 88.9 | 11.1 | – | – | – | 7.62 | 7.62 | – | 5.49 | – | – | 3.1 | 2.1 | 5.5 |
| 2 1/2″ | 73.03 | 9.53 | – | – | – | 7.01 | 7.01 | – | 5.16 | – | – | 3.1 | 2.1 | 5.2 |
| 2″ | 60.33 | 9.74 | – | – | – | 5.54 | 5.54 | – | 3.91 | – | – | 2.8 | 1.7 | 3.9 |
| 1 1/2″ | 48.26 | 7.14 | – | – | – | 5.08 | 5.08 | – | 3.68 | – | – | 2.8 | 1.7 | 3.7 |
| 1 1/4″ | 42.16 | 6.35 | – | – | – | 4.85 | 4.85 | – | 3.56 | – | – | 2.8 | 1.7 | 3.6 |
| 3/4″ | 26.67 | 5.56 | – | – | – | 3.91 | 3.91 | – | 2.87 | – | – | 2.1 | 1.7 | 2.9 |
Elongation Requirements of T11 Boiler Tube
| WT | T5, T9, T11, T22 | |||
|---|---|---|---|---|
| mm | in. | Transverse | Longitudinal | |
| 5.6 | 7/32 | – | 26 | |
| 4 | 5/32 | – | 22 | |
| 8 | 5/16 | 20 | 30 | |
| 4.8 | 3/16 | – | 24 | |
| 3.2 | 7/8 | – | 21 | |
| 7.2 | 9/32 | 19 | 28 | |
| 1.6 | 1/18 | – | 18 | |
| 6.4 | 1/4 | 18 | 27 | |
| 2.4 | 3/32 | – | 20 | |
ASTM A213 T11 Equivalent Material
| EN | ASTM | DIN | UNS | GB | JIS |
|---|---|---|---|---|---|
| 10CrMo5-5 | P11 | 1.7338 | K11597 | 12Cr1MoV | STBA23 |
SA213 T11 Material Composition
| Property | Hardness | Tensile Strength | Elongation | Yield Strength |
|---|---|---|---|---|
| Value | 179 max | 415 min | 30 min | 205 min |
ASTM A213 T11 Tube Delivery Time As Per Country
| Variation in Price Extra 5 % |
|
|---|---|
| Export to | Shipping Time in Days |
| Switzerland | 45-60 |
| Albania | 45 |
| Portugal | 45 |
| Belgium | 45 |
| Hungary | 45 |
| Slovakia | 45-60 |
| Austria | 60 |
| Singapore | 8 |
| Malaysia | 7 |
| Netherlands | 60 |
| Slovenia | 60 |
| Finland | 45-60 |
| Croatia | 60 |
| Germany | 60 |
| Czech Republic | 45 |
| Indonesia | 7 |